0
Your Cart

GROWTT Residential Energy Storage System for US market

In recent years, with the development of technology, the cost of photovoltaic power generation has been gradually reduced, and the concept of environmental protection has been deeply rooted in the hearts of the people.Driven by both cost advantages and policies, the US energy storage markethas developed rapidly and has become the world’s major energy storage market,especially for the residential , has become the focus and development area of many renewable energy manufacturers.The residential energy storage system includes PV module, battery, energy storage Growatt inverter, automatic transfer switch, meter, etc. How to design solutions according to household electricity needs?Let’s take the energy needs of an average family of four in the US as an example.Assuming the household loads operating situation are as follows:

The total power of the household loads is about: 6kW, and energy required is about 27kWh. Assuming that the installed PV panel capacity on the roof is 15kW, it is recommended to install a 10kW energy storage Growatt inverter, and a 30kWh battery can be selected according to its consumption.

The recommend model as below:

  • PV inverter: MIN 10KTL-XH-US*1
  • Rated power: 10kW
  • Battery: ARO 16.5H-C1-US*2
  • Battery capacity: 33kWh

GROWATT MIN XH-US residential energy storage system is dedicated for US market with large rooftop and large energy consumption. Multiple rated powermodels (3-11.4kW) can be selected, higher backup output power(upto11.4kW), flexible battery capacity(6.6-39.6kWh)selection and other advantages have won market recognition.The MIN XH-US inverter and ARO HV battery both ranked in “2021 Top Product” list by Solar Power World in the US.

It also has the following advanced features:

  • Future-proofed Battery Ready:

PV solution, easily to extend storage while connecting the battery, which could reduce the initial investment and offer customers enough flexibilities.

  • Powerful:

A MIN 10KTL-XH US inverter provides 10kW full power AC output plus 10kW full power battery charge.

  • Multiple Energy Management Modes for diverse application scenarios:

Self Consumption, TOU-Charge/Discharge, Backup, Zero Export.

  • Self Consumption:

In the self-consumption mode, the system will prioritize the PV power usage and avoid getting the power from grid. The first priority is to provide the power to the load and second priority is to shift the power to the battery for charging. If come with residual power, for PPA program customer, the system will back feed the power to the grid for ROI.

  • TOU-Charge/Discharge:

More and more utility companies are applying the TOU peak rate programs for home owners. In DC coupled TOU mode, XH system will prioritize the source of load consumption based on peak hours and off-peak hours. The system will use the PV free energy to provide the power to the grid and if there is residual power, it will charge the battery from PV. If SOC of the battery is sufficient and PV power is low, battery power will energize the system without PV power or balance with PV power. If both PV and battery power are low, as the last option, it will use AC grid power to energize the load which can minimize the usage of AC grid power to reduce the electricity bill.

  • Backup:

In the DC couple backup mode, the system will not use the AC power for any demands. The system will optimize the PV and battery power to provide the power to the load and battery. Typically, the backup mode is running for emergency grid outage or holiday travel purpose to ensure no AC power to be taken to the home. The system will be based on PV condition and the SOC of the battery to maintain the operation for the load.

  • Zero Export:

In Hawaii and some of the States, the utility company prohibits the back feed power to utility side to ensure the stability of grid. In DC couple zero export mode, XH system will automatically avoid feeding the power to the grid and first priority is to provide the power for the load and secondary is to provide the power for battery charging based on battery SOC.

According to the above user needs, the following two systems can be provided:

1.Critical Load Backup System

System Rated Power Range: 3kW – 11.4kW

Battery Capacity Range: 6.6kWh – 39.6kWh

System Benefits:

Full Power Backup: 3kW – 11.4kW

Remote operation and maintenance Remote software upgrade

This solution only supplies power to important emergency loads during a power outage, suitable for small house with limited backup appliances, and its system cost is more economical. The output power can reach 11.4kW, and the battery capacity can reach 40kWh, which fully meets the backup power needs.

2.Whole Home Backup System

System Rated Power Range: 3kW – 11.4kW

Battery Capacity Range: 6.6kWh – 39.6kWh

System Benefits:

Full Power Backup: 3kW – 11.4kW

Whole House Backup

Integrate Generator Smart Control

Integrate Meter

This solution is used to supply power to the whole home load during a power outage. The output power can reach 11.4kW, and the battery capacity can reach 40kWh, which fully meets the backup power demand. It can also be connected to a generator. When the battery is out of power, it can be switched to the generator for power supply automatically At the same time, it has a remote wake-up function and automatic switching function, which can remotely start the system and realize the automatic power supply of the PV system.

Leave a Reply

Your email address will not be published. Required fields are marked *

Click Here Contact Me